Q. We removed tile from the original wood flooring in our bedroom but they layed it down with asphalt tar sealant and it is stuck to the wood floor. We have bought a sealant stripper but it is coming off with difficulty. Any suggestions would be appreciated.
A. You'll be lucky to remove enough of it to save the floor beneath it. This is bad news. The commercial stripper is time-consuming, but it is the better option if you're even considering trying to rehab the wood floor.
If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.
There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.
If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.
If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.
There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.
If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.
How do I know which company's wood is good for wood flooring?
Q. Which company's wood is good for wood flooring. I am thinking about engineered wood. Do you know how to pick a good company?
A. What I do is Google the flooring name and "reviews" and see what others have to say.
How much should i charge to install wood flooring ?
Q. As a handyman, how much do i charge per sq.ft to install oak wood flooring? They all need to be glued and there will be alot of cuts because the wood needs to curve in an s shape. There is 1000 sq.ft. I installed 1600 sq.ft before but did not charge my father in law. Thanks for your help.
A. For glue down wood flooring, 4 dollars a s.f. is about what you should be charging.
Powered by Yahoo! Answers
No comments:
Post a Comment