How to prep subfloor for wood flooring?

Q. I've installed prefinished wood flooring before but the kitchen has ceramic tile glued to 1/4" plywood, which is then (I assume) glued and nailed to the original sub floor. I need to remove the tile and 1/4" plywood so I can put our new wood flooring on the original subfloor. What is the best way to do this? I was planning on using a hammer and chisel but is there a specialized tool i can use?

A. Yes there is.. A hammer and wide chisel... In your case , and I ve removed 100s of floors over the years and that what you need to do. Hammer and chisel off the tile, using caution. Chips FLY!! Then you can use a crow bar to get under the wood and go at it.If your lucky it was screwed down and you can unscrew a lot of them. But most will pull through the 1/4" luan and then deal with that later.
Your lucky it was installed wrong this is an easier rip out, Suggestion. Safety glasses, long sleeve shirt sand ear protection to prevent chips in the ears ( I m not kidding) Cover doorways to help prevent dust and put a fan in a window to suck dust out.
Any questions you can e mail me through my avatar and check my qualifications GL

What type of cleaning technique should I use on bamboo wood flooring?

Q. I just recently bought a house and the house has bamboo laminate flooring what type of cleaner should I used to clean the floor. Will a steam mop do the trick? I was told Murray's oil is a good cleaner for wood flooring.

A. Do not use Murphy's. Use Bona wood floor cleaner. They even make a spray mop that is similar to a wet swiffer.

How do I remove asphalt tar sealant from wood flooring?

Q. We removed tile from the original wood flooring in our bedroom but they layed it down with asphalt tar sealant and it is stuck to the wood floor. We have bought a sealant stripper but it is coming off with difficulty. Any suggestions would be appreciated.

A. You'll be lucky to remove enough of it to save the floor beneath it. This is bad news. The commercial stripper is time-consuming, but it is the better option if you're even considering trying to rehab the wood floor.

If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.

There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.

If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.

Powered by Yahoo! Answers

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

What wood flooring should I use for my table tennis room?

Q. What wood flooring should I use for my table tennis room? Some recommended floating interlocking laminate flooring with good underlays is good but I don't know what the hell are they talking about. I was wondering if some could suggest and explain some wood that can be used to play Table Tennis. To help Table Tennis requires good shock absorption and cushion from underlays. Those expert wood people out there please help.

A. Vinyl floor tiles are probably the best choice for your play room. These tiles are easy to install and are extremely durable

How to prep subfloor for wood flooring?

Q. I've installed prefinished wood flooring before but the kitchen has ceramic tile glued to 1/4" plywood, which is then (I assume) glued and nailed to the original sub floor. I need to remove the tile and 1/4" plywood so I can put our new wood flooring on the original subfloor. What is the best way to do this? I was planning on using a hammer and chisel but is there a specialized tool i can use?

A. Yes there is.. A hammer and wide chisel... In your case , and I ve removed 100s of floors over the years and that what you need to do. Hammer and chisel off the tile, using caution. Chips FLY!! Then you can use a crow bar to get under the wood and go at it.If your lucky it was screwed down and you can unscrew a lot of them. But most will pull through the 1/4" luan and then deal with that later.
Your lucky it was installed wrong this is an easier rip out, Suggestion. Safety glasses, long sleeve shirt sand ear protection to prevent chips in the ears ( I m not kidding) Cover doorways to help prevent dust and put a fan in a window to suck dust out.
Any questions you can e mail me through my avatar and check my qualifications GL

Powered by Yahoo! Answers

How do I remove asphalt tar sealant from wood flooring?

Q. We removed tile from the original wood flooring in our bedroom but they layed it down with asphalt tar sealant and it is stuck to the wood floor. We have bought a sealant stripper but it is coming off with difficulty. Any suggestions would be appreciated.

A. You'll be lucky to remove enough of it to save the floor beneath it. This is bad news. The commercial stripper is time-consuming, but it is the better option if you're even considering trying to rehab the wood floor.

If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.

There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.

If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.

How do I know which company's wood is good for wood flooring?

Q. Which company's wood is good for wood flooring. I am thinking about engineered wood. Do you know how to pick a good company?

A. What I do is Google the flooring name and "reviews" and see what others have to say.

How much should i charge to install wood flooring ?

Q. As a handyman, how much do i charge per sq.ft to install oak wood flooring? They all need to be glued and there will be alot of cuts because the wood needs to curve in an s shape. There is 1000 sq.ft. I installed 1600 sq.ft before but did not charge my father in law. Thanks for your help.

A. For glue down wood flooring, 4 dollars a s.f. is about what you should be charging.

Powered by Yahoo! Answers

What is the best machine to clean my wood floors?

Q. Almost all of my house is covered in wood flooring and there are about 8 people in the house. So you can imagine how hard it is to clean massive wood floors that get ALOT of traffic. I need some kind of machine to effectively clean my wood floors. I've been researching steamers and steamer vacuums, but I want to know which machine will work best. Also, my wood floors are surface sealed.

A. Use a damp mop with vinegar and water mixed 10 to 1. Why waste money on a machine that may ruin your floors? If there is any break in the finish on your floor, a steamer is forcing moisture into the wood. This will cause stains and possibly rot. You want as little moisture on your wood floors as possible.

What is the best place to start a wood flooring business?

Q. I had success running a wood flooring biz in Colorado, but I moved to San Diego and I'm finding that th pay vs cost of living arent too good here, plus alot of work is taken by immigrants. I dont want to mov back to Colorado so I'm looking for a city I could have the same success. Thanks

A. Excellent question. My sand and finish guy moved from Nebraska to Central Florida when Central Florida was having a housing boom....now that times are tight, he's looking at moving to Texas. He quickly found out the cost of living there is not great, plus...he has to start over from stratch. Personally, I think he's going to have the same problem there.

I fully appreciate what you're experiencing, fighting the substandard labor market. The problem is, when times get tight - new home builders start looking for ways to cut costs, and that usually means quality goes as well. Focus on retrofits....people with wood floors who need them redone. Make sure you visqueen off any areas not getting redone. Make sure you put plastic over the kitchen cabinets. Make sure your equipment is in perfect working order. Make sure you have sanding equipment with a vacuum attached, and then after you're done....vacuum with a heavy duty vacuum again. Make sure when you say you're going to be there Tuesday the 6th at 9:00am...You are there the Tuesday the 6th of the month you discussed at 9:00am...not 9:30 - not 4...but 8:45am to 9am. You and your crew should have matching shirts, khakis(they do sell them at WalMart), no visable tats, piercings, a sign on the van, and look like you can walk into a 5 million dollar home or a $5,000 home, with no issues whatsoever.

In this day and time of things getting tighter...NOTHING is going to go as far as customer service. Setting yourself as better than the rest. And word of mouth, is the most powerful advertising form. If you cost a bit more...make sure you have a reason why, and be able to back it up. This is not a quick solution, but one that takes time and patience. We've all had to take a second job to support our passion, but quality in workmanship, with the right clientele will always win out....you might have to do a job or two for "the fun"....and tell them....I'm doing this at a reduced rate - to prove what I can do. Of course, you'll always have your tight wads, who don't care if their floor has swirls, and bubbles - but most people want their friends to come in and say...Wow...who did your floors! NOT ....ummmm..so who did your floors?

So, while that didn't answer your question as to geography...if you're happy in the area....work your butt off....call on commercial companies as well, don't forget - to keep up with your education on every product.

Good Luck!

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

Powered by Yahoo! Answers

What is the best machine to clean my wood floors?

Q. Almost all of my house is covered in wood flooring and there are about 8 people in the house. So you can imagine how hard it is to clean massive wood floors that get ALOT of traffic. I need some kind of machine to effectively clean my wood floors. I've been researching steamers and steamer vacuums, but I want to know which machine will work best. Also, my wood floors are surface sealed.

A. Use a damp mop with vinegar and water mixed 10 to 1. Why waste money on a machine that may ruin your floors? If there is any break in the finish on your floor, a steamer is forcing moisture into the wood. This will cause stains and possibly rot. You want as little moisture on your wood floors as possible.

What is the best place to start a wood flooring business?

Q. I had success running a wood flooring biz in Colorado, but I moved to San Diego and I'm finding that th pay vs cost of living arent too good here, plus alot of work is taken by immigrants. I dont want to mov back to Colorado so I'm looking for a city I could have the same success. Thanks

A. Excellent question. My sand and finish guy moved from Nebraska to Central Florida when Central Florida was having a housing boom....now that times are tight, he's looking at moving to Texas. He quickly found out the cost of living there is not great, plus...he has to start over from stratch. Personally, I think he's going to have the same problem there.

I fully appreciate what you're experiencing, fighting the substandard labor market. The problem is, when times get tight - new home builders start looking for ways to cut costs, and that usually means quality goes as well. Focus on retrofits....people with wood floors who need them redone. Make sure you visqueen off any areas not getting redone. Make sure you put plastic over the kitchen cabinets. Make sure your equipment is in perfect working order. Make sure you have sanding equipment with a vacuum attached, and then after you're done....vacuum with a heavy duty vacuum again. Make sure when you say you're going to be there Tuesday the 6th at 9:00am...You are there the Tuesday the 6th of the month you discussed at 9:00am...not 9:30 - not 4...but 8:45am to 9am. You and your crew should have matching shirts, khakis(they do sell them at WalMart), no visable tats, piercings, a sign on the van, and look like you can walk into a 5 million dollar home or a $5,000 home, with no issues whatsoever.

In this day and time of things getting tighter...NOTHING is going to go as far as customer service. Setting yourself as better than the rest. And word of mouth, is the most powerful advertising form. If you cost a bit more...make sure you have a reason why, and be able to back it up. This is not a quick solution, but one that takes time and patience. We've all had to take a second job to support our passion, but quality in workmanship, with the right clientele will always win out....you might have to do a job or two for "the fun"....and tell them....I'm doing this at a reduced rate - to prove what I can do. Of course, you'll always have your tight wads, who don't care if their floor has swirls, and bubbles - but most people want their friends to come in and say...Wow...who did your floors! NOT ....ummmm..so who did your floors?

So, while that didn't answer your question as to geography...if you're happy in the area....work your butt off....call on commercial companies as well, don't forget - to keep up with your education on every product.

Good Luck!

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

Powered by Yahoo! Answers

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

What wood flooring should I use for my table tennis room?

Q. What wood flooring should I use for my table tennis room? Some recommended floating interlocking laminate flooring with good underlays is good but I don't know what the hell are they talking about. I was wondering if some could suggest and explain some wood that can be used to play Table Tennis. To help Table Tennis requires good shock absorption and cushion from underlays. Those expert wood people out there please help.

A. Vinyl floor tiles are probably the best choice for your play room. These tiles are easy to install and are extremely durable

How to prep subfloor for wood flooring?

Q. I've installed prefinished wood flooring before but the kitchen has ceramic tile glued to 1/4" plywood, which is then (I assume) glued and nailed to the original sub floor. I need to remove the tile and 1/4" plywood so I can put our new wood flooring on the original subfloor. What is the best way to do this? I was planning on using a hammer and chisel but is there a specialized tool i can use?

A. Yes there is.. A hammer and wide chisel... In your case , and I ve removed 100s of floors over the years and that what you need to do. Hammer and chisel off the tile, using caution. Chips FLY!! Then you can use a crow bar to get under the wood and go at it.If your lucky it was screwed down and you can unscrew a lot of them. But most will pull through the 1/4" luan and then deal with that later.
Your lucky it was installed wrong this is an easier rip out, Suggestion. Safety glasses, long sleeve shirt sand ear protection to prevent chips in the ears ( I m not kidding) Cover doorways to help prevent dust and put a fan in a window to suck dust out.
Any questions you can e mail me through my avatar and check my qualifications GL

Powered by Yahoo! Answers

How do I replace wood flooring with tile in entrance way?

Q. In my entryway, we have wood flooring that has been warped do to water. My entryway also goes into my dining room using the same wood floowing flow. So, essentially I just want to take a small area (3x6) at the entryway to replace the wood flooring with tile. How would I go about this? Is it possible to cut the pre-existing wood flooring to make an area to lay the tile?

A. It is possible, as a matter of fact I've done it several times. Do you have an idea of the thickness of your wood floor - is it 3/4" or the 1/4" or 3/8" stuff. Knowing the thickness will help to determine what thickness of underlayment - tile backer board and/or your tile can be so your tile will not be thicker than your wood.

To cut the area out, I'd suggest you use masking tape and mark off where your lines to cut will be. The tape will make it easier to see the lines when you are cutting and it will also help to prevent splintering on the end grain cuts.

Once you have the area masked and SQUARED up. Emphasing squaring the area up - usually off the door. If your area isn't square then your tile won't look good. I'd suggest you take a hammer and chisel and remove some of the wood floor in the center of your area to determine the exact thickness of the wood. Once that is determined, take a circular saw with a plywood blade and set it for just a little shallower than that depth (to prevent cutting into the subfloor and weakening it). If the wood floor is oak, I'd suggest you take a utility knife and scribe along the lines you have and then using the saw cut just inside those scribed lines.

You must be careful not to cut beyond your lines - the area that can not be cut with the circular saw can then be cut with a sawzall or a sabre saw. The sawzall with a fine toothed blade is the best way to go. Again be very careful not to cut beyond your lines or cut through the subfloor.

Once the lines are cut, remove the wood and chisel and chips on the edges that the saws missed. Now, I'd suggest that you apply some polyeurathane to the newly cut edges to prevent any moisture from setting and grouting your tile from getting into the wood floor and staining or causing it to warp again.

Now that your area is cut out and the edges are sealed, You are ready to put down backer board and tile. I'd use hardi-backer, durrock, or a similar product - may only need 1/4" thick or could need 1/2" depending on the tile and thickness of your floor. Don't forget to allow for the thickness of thinset ( 1/4" usually) when deciding on tile and backer board thickness.

Set your tiles in the pattern you want and your entrance will look new again.

I hope that this helped answer your question.

What is the best machine to clean my wood floors?

Q. Almost all of my house is covered in wood flooring and there are about 8 people in the house. So you can imagine how hard it is to clean massive wood floors that get ALOT of traffic. I need some kind of machine to effectively clean my wood floors. I've been researching steamers and steamer vacuums, but I want to know which machine will work best. Also, my wood floors are surface sealed.

A. Use a damp mop with vinegar and water mixed 10 to 1. Why waste money on a machine that may ruin your floors? If there is any break in the finish on your floor, a steamer is forcing moisture into the wood. This will cause stains and possibly rot. You want as little moisture on your wood floors as possible.

What is the best place to start a wood flooring business?

Q. I had success running a wood flooring biz in Colorado, but I moved to San Diego and I'm finding that th pay vs cost of living arent too good here, plus alot of work is taken by immigrants. I dont want to mov back to Colorado so I'm looking for a city I could have the same success. Thanks

A. Excellent question. My sand and finish guy moved from Nebraska to Central Florida when Central Florida was having a housing boom....now that times are tight, he's looking at moving to Texas. He quickly found out the cost of living there is not great, plus...he has to start over from stratch. Personally, I think he's going to have the same problem there.

I fully appreciate what you're experiencing, fighting the substandard labor market. The problem is, when times get tight - new home builders start looking for ways to cut costs, and that usually means quality goes as well. Focus on retrofits....people with wood floors who need them redone. Make sure you visqueen off any areas not getting redone. Make sure you put plastic over the kitchen cabinets. Make sure your equipment is in perfect working order. Make sure you have sanding equipment with a vacuum attached, and then after you're done....vacuum with a heavy duty vacuum again. Make sure when you say you're going to be there Tuesday the 6th at 9:00am...You are there the Tuesday the 6th of the month you discussed at 9:00am...not 9:30 - not 4...but 8:45am to 9am. You and your crew should have matching shirts, khakis(they do sell them at WalMart), no visable tats, piercings, a sign on the van, and look like you can walk into a 5 million dollar home or a $5,000 home, with no issues whatsoever.

In this day and time of things getting tighter...NOTHING is going to go as far as customer service. Setting yourself as better than the rest. And word of mouth, is the most powerful advertising form. If you cost a bit more...make sure you have a reason why, and be able to back it up. This is not a quick solution, but one that takes time and patience. We've all had to take a second job to support our passion, but quality in workmanship, with the right clientele will always win out....you might have to do a job or two for "the fun"....and tell them....I'm doing this at a reduced rate - to prove what I can do. Of course, you'll always have your tight wads, who don't care if their floor has swirls, and bubbles - but most people want their friends to come in and say...Wow...who did your floors! NOT ....ummmm..so who did your floors?

So, while that didn't answer your question as to geography...if you're happy in the area....work your butt off....call on commercial companies as well, don't forget - to keep up with your education on every product.

Good Luck!

Powered by Yahoo! Answers

What type of cleaning technique should I use on bamboo wood flooring?

Q. I just recently bought a house and the house has bamboo laminate flooring what type of cleaner should I used to clean the floor. Will a steam mop do the trick? I was told Murray's oil is a good cleaner for wood flooring.

A. Do not use Murphy's. Use Bona wood floor cleaner. They even make a spray mop that is similar to a wet swiffer.

How do I remove asphalt tar sealant from wood flooring?

Q. We removed tile from the original wood flooring in our bedroom but they layed it down with asphalt tar sealant and it is stuck to the wood floor. We have bought a sealant stripper but it is coming off with difficulty. Any suggestions would be appreciated.

A. You'll be lucky to remove enough of it to save the floor beneath it. This is bad news. The commercial stripper is time-consuming, but it is the better option if you're even considering trying to rehab the wood floor.

If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.

There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.

If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.

How much should i charge to install wood flooring ?

Q. As a handyman, how much do i charge per sq.ft to install oak wood flooring? They all need to be glued and there will be alot of cuts because the wood needs to curve in an s shape. There is 1000 sq.ft. I installed 1600 sq.ft before but did not charge my father in law. Thanks for your help.

A. For glue down wood flooring, 4 dollars a s.f. is about what you should be charging.

Powered by Yahoo! Answers

What is the best machine to clean my wood floors?

Q. Almost all of my house is covered in wood flooring and there are about 8 people in the house. So you can imagine how hard it is to clean massive wood floors that get ALOT of traffic. I need some kind of machine to effectively clean my wood floors. I've been researching steamers and steamer vacuums, but I want to know which machine will work best. Also, my wood floors are surface sealed.

A. Use a damp mop with vinegar and water mixed 10 to 1. Why waste money on a machine that may ruin your floors? If there is any break in the finish on your floor, a steamer is forcing moisture into the wood. This will cause stains and possibly rot. You want as little moisture on your wood floors as possible.

What is the best place to start a wood flooring business?

Q. I had success running a wood flooring biz in Colorado, but I moved to San Diego and I'm finding that th pay vs cost of living arent too good here, plus alot of work is taken by immigrants. I dont want to mov back to Colorado so I'm looking for a city I could have the same success. Thanks

A. Excellent question. My sand and finish guy moved from Nebraska to Central Florida when Central Florida was having a housing boom....now that times are tight, he's looking at moving to Texas. He quickly found out the cost of living there is not great, plus...he has to start over from stratch. Personally, I think he's going to have the same problem there.

I fully appreciate what you're experiencing, fighting the substandard labor market. The problem is, when times get tight - new home builders start looking for ways to cut costs, and that usually means quality goes as well. Focus on retrofits....people with wood floors who need them redone. Make sure you visqueen off any areas not getting redone. Make sure you put plastic over the kitchen cabinets. Make sure your equipment is in perfect working order. Make sure you have sanding equipment with a vacuum attached, and then after you're done....vacuum with a heavy duty vacuum again. Make sure when you say you're going to be there Tuesday the 6th at 9:00am...You are there the Tuesday the 6th of the month you discussed at 9:00am...not 9:30 - not 4...but 8:45am to 9am. You and your crew should have matching shirts, khakis(they do sell them at WalMart), no visable tats, piercings, a sign on the van, and look like you can walk into a 5 million dollar home or a $5,000 home, with no issues whatsoever.

In this day and time of things getting tighter...NOTHING is going to go as far as customer service. Setting yourself as better than the rest. And word of mouth, is the most powerful advertising form. If you cost a bit more...make sure you have a reason why, and be able to back it up. This is not a quick solution, but one that takes time and patience. We've all had to take a second job to support our passion, but quality in workmanship, with the right clientele will always win out....you might have to do a job or two for "the fun"....and tell them....I'm doing this at a reduced rate - to prove what I can do. Of course, you'll always have your tight wads, who don't care if their floor has swirls, and bubbles - but most people want their friends to come in and say...Wow...who did your floors! NOT ....ummmm..so who did your floors?

So, while that didn't answer your question as to geography...if you're happy in the area....work your butt off....call on commercial companies as well, don't forget - to keep up with your education on every product.

Good Luck!

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

Powered by Yahoo! Answers

What is the best place to start a wood flooring business?

Q. I had success running a wood flooring biz in Colorado, but I moved to San Diego and I'm finding that th pay vs cost of living arent too good here, plus alot of work is taken by immigrants. I dont want to mov back to Colorado so I'm looking for a city I could have the same success. Thanks

A. Excellent question. My sand and finish guy moved from Nebraska to Central Florida when Central Florida was having a housing boom....now that times are tight, he's looking at moving to Texas. He quickly found out the cost of living there is not great, plus...he has to start over from stratch. Personally, I think he's going to have the same problem there.

I fully appreciate what you're experiencing, fighting the substandard labor market. The problem is, when times get tight - new home builders start looking for ways to cut costs, and that usually means quality goes as well. Focus on retrofits....people with wood floors who need them redone. Make sure you visqueen off any areas not getting redone. Make sure you put plastic over the kitchen cabinets. Make sure your equipment is in perfect working order. Make sure you have sanding equipment with a vacuum attached, and then after you're done....vacuum with a heavy duty vacuum again. Make sure when you say you're going to be there Tuesday the 6th at 9:00am...You are there the Tuesday the 6th of the month you discussed at 9:00am...not 9:30 - not 4...but 8:45am to 9am. You and your crew should have matching shirts, khakis(they do sell them at WalMart), no visable tats, piercings, a sign on the van, and look like you can walk into a 5 million dollar home or a $5,000 home, with no issues whatsoever.

In this day and time of things getting tighter...NOTHING is going to go as far as customer service. Setting yourself as better than the rest. And word of mouth, is the most powerful advertising form. If you cost a bit more...make sure you have a reason why, and be able to back it up. This is not a quick solution, but one that takes time and patience. We've all had to take a second job to support our passion, but quality in workmanship, with the right clientele will always win out....you might have to do a job or two for "the fun"....and tell them....I'm doing this at a reduced rate - to prove what I can do. Of course, you'll always have your tight wads, who don't care if their floor has swirls, and bubbles - but most people want their friends to come in and say...Wow...who did your floors! NOT ....ummmm..so who did your floors?

So, while that didn't answer your question as to geography...if you're happy in the area....work your butt off....call on commercial companies as well, don't forget - to keep up with your education on every product.

Good Luck!

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

What wood flooring should I use for my table tennis room?

Q. What wood flooring should I use for my table tennis room? Some recommended floating interlocking laminate flooring with good underlays is good but I don't know what the hell are they talking about. I was wondering if some could suggest and explain some wood that can be used to play Table Tennis. To help Table Tennis requires good shock absorption and cushion from underlays. Those expert wood people out there please help.

A. Vinyl floor tiles are probably the best choice for your play room. These tiles are easy to install and are extremely durable

Powered by Yahoo! Answers

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

What wood flooring should I use for my table tennis room?

Q. What wood flooring should I use for my table tennis room? Some recommended floating interlocking laminate flooring with good underlays is good but I don't know what the hell are they talking about. I was wondering if some could suggest and explain some wood that can be used to play Table Tennis. To help Table Tennis requires good shock absorption and cushion from underlays. Those expert wood people out there please help.

A. Vinyl floor tiles are probably the best choice for your play room. These tiles are easy to install and are extremely durable

How to prep subfloor for wood flooring?

Q. I've installed prefinished wood flooring before but the kitchen has ceramic tile glued to 1/4" plywood, which is then (I assume) glued and nailed to the original sub floor. I need to remove the tile and 1/4" plywood so I can put our new wood flooring on the original subfloor. What is the best way to do this? I was planning on using a hammer and chisel but is there a specialized tool i can use?

A. Yes there is.. A hammer and wide chisel... In your case , and I ve removed 100s of floors over the years and that what you need to do. Hammer and chisel off the tile, using caution. Chips FLY!! Then you can use a crow bar to get under the wood and go at it.If your lucky it was screwed down and you can unscrew a lot of them. But most will pull through the 1/4" luan and then deal with that later.
Your lucky it was installed wrong this is an easier rip out, Suggestion. Safety glasses, long sleeve shirt sand ear protection to prevent chips in the ears ( I m not kidding) Cover doorways to help prevent dust and put a fan in a window to suck dust out.
Any questions you can e mail me through my avatar and check my qualifications GL

Powered by Yahoo! Answers

Can you place wood flooring on an uneven floor?

Q. there is a long hallway in my house I'd like to have wood flooring. but my contractor says that at the end of the hallway there is a slight incline. he says wood flooring would have to stop there and be replaced with carpet. esthetically I think it would look awful. is what he says true or is there another way to keep it all wood?

A. Hardwood floor installation can be slowed by an uneven subfloor. Before installing hardwood floors, use a straight edge to find the humps and dips in the subfloor. Then, using a floor leveling compound or asphalt shingles, shim the dips so the floor is level.

How many boxes would you have to buy of Laminate wood flooring to cover a 10x15 room?

Q. if it says it does 16sq ft per box?

I have a 1400sq ft home. and the math a did at 50 bucks a box, it would be well over 5k to do my home?

and at that price how does anyone afford to do wood flooring... even the fake kind? Am I figuring it wrong?

A. Are you doing one room or a whole house?? Your question suggests one room 10 X 15= 150 sq ft. You would divide that by the square footage listed on the box. In your example 16 sq ft= 9.37 or 10 boxes @ 50.00 = $500.00. To do the whole house could very well be $5000.00 for materials alone. Add to that the cost of the underlayment about $60.00 for a 100 sq ft roll. Are you sure you were looking at laminate and not engineered wood flooring? Laminate flooring cannot be refinished. Once it is scratched it's scratched! Engineered wood can be refinished once. I would suggest shopping around a bit more.

How much more is wood flooring compaired to carpet per square foot?

Q. I'm removing my ugly carpet and putting something new in. My mom wants carpet (less expensive) but its my dream to have wood flooring in my bedroom. I understand it all depends on where you by it, what kind and installation but maybe give me an estimate? Thanks so much!

A. 99% of the time wood will be more expense for the basic product. If your looking at some base grade products wood will go for around 2 $ a s/f more. Of course this varies with the exact product but you know what I mean.
Basic carpet , installed with a pad runs around (+-) 2.50 / 3.00$ a s/f.
Basic wood ( 2 1/4" oak) will run closer to 5/6$ a s/f installed.
There are laminates and other simulated woods that run closer to a carpet installed price.
And Traffic Master Allure you can do yourself , if you have basic skills,with nothing but a utility knife, That goes for 2$ a s/f.
Any questions you can e mail me through my avatar. GL

Powered by Yahoo! Answers

How do I remove asphalt tar sealant from wood flooring?

Q. We removed tile from the original wood flooring in our bedroom but they layed it down with asphalt tar sealant and it is stuck to the wood floor. We have bought a sealant stripper but it is coming off with difficulty. Any suggestions would be appreciated.

A. You'll be lucky to remove enough of it to save the floor beneath it. This is bad news. The commercial stripper is time-consuming, but it is the better option if you're even considering trying to rehab the wood floor.

If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.

There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.

If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.

How much should i charge to install wood flooring ?

Q. As a handyman, how much do i charge per sq.ft to install oak wood flooring? They all need to be glued and there will be alot of cuts because the wood needs to curve in an s shape. There is 1000 sq.ft. I installed 1600 sq.ft before but did not charge my father in law. Thanks for your help.

A. For glue down wood flooring, 4 dollars a s.f. is about what you should be charging.

Can you place wood flooring on an uneven floor?

Q. there is a long hallway in my house I'd like to have wood flooring. but my contractor says that at the end of the hallway there is a slight incline. he says wood flooring would have to stop there and be replaced with carpet. esthetically I think it would look awful. is what he says true or is there another way to keep it all wood?

A. Hardwood floor installation can be slowed by an uneven subfloor. Before installing hardwood floors, use a straight edge to find the humps and dips in the subfloor. Then, using a floor leveling compound or asphalt shingles, shim the dips so the floor is level.

Powered by Yahoo! Answers

How do I remove asphalt tar sealant from wood flooring?

Q. We removed tile from the original wood flooring in our bedroom but they layed it down with asphalt tar sealant and it is stuck to the wood floor. We have bought a sealant stripper but it is coming off with difficulty. Any suggestions would be appreciated.

A. You'll be lucky to remove enough of it to save the floor beneath it. This is bad news. The commercial stripper is time-consuming, but it is the better option if you're even considering trying to rehab the wood floor.

If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.

There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.

If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.

How much should i charge to install wood flooring ?

Q. As a handyman, how much do i charge per sq.ft to install oak wood flooring? They all need to be glued and there will be alot of cuts because the wood needs to curve in an s shape. There is 1000 sq.ft. I installed 1600 sq.ft before but did not charge my father in law. Thanks for your help.

A. For glue down wood flooring, 4 dollars a s.f. is about what you should be charging.

Can you place wood flooring on an uneven floor?

Q. there is a long hallway in my house I'd like to have wood flooring. but my contractor says that at the end of the hallway there is a slight incline. he says wood flooring would have to stop there and be replaced with carpet. esthetically I think it would look awful. is what he says true or is there another way to keep it all wood?

A. Hardwood floor installation can be slowed by an uneven subfloor. Before installing hardwood floors, use a straight edge to find the humps and dips in the subfloor. Then, using a floor leveling compound or asphalt shingles, shim the dips so the floor is level.

Powered by Yahoo! Answers

What wood flooring should I use for my table tennis room?

Q. What wood flooring should I use for my table tennis room? Some recommended floating interlocking laminate flooring with good underlays is good but I don't know what the hell are they talking about. I was wondering if some could suggest and explain some wood that can be used to play Table Tennis. To help Table Tennis requires good shock absorption and cushion from underlays. Those expert wood people out there please help.

A. Vinyl floor tiles are probably the best choice for your play room. These tiles are easy to install and are extremely durable

How to prep subfloor for wood flooring?

Q. I've installed prefinished wood flooring before but the kitchen has ceramic tile glued to 1/4" plywood, which is then (I assume) glued and nailed to the original sub floor. I need to remove the tile and 1/4" plywood so I can put our new wood flooring on the original subfloor. What is the best way to do this? I was planning on using a hammer and chisel but is there a specialized tool i can use?

A. Yes there is.. A hammer and wide chisel... In your case , and I ve removed 100s of floors over the years and that what you need to do. Hammer and chisel off the tile, using caution. Chips FLY!! Then you can use a crow bar to get under the wood and go at it.If your lucky it was screwed down and you can unscrew a lot of them. But most will pull through the 1/4" luan and then deal with that later.
Your lucky it was installed wrong this is an easier rip out, Suggestion. Safety glasses, long sleeve shirt sand ear protection to prevent chips in the ears ( I m not kidding) Cover doorways to help prevent dust and put a fan in a window to suck dust out.
Any questions you can e mail me through my avatar and check my qualifications GL

What type of cleaning technique should I use on bamboo wood flooring?

Q. I just recently bought a house and the house has bamboo laminate flooring what type of cleaner should I used to clean the floor. Will a steam mop do the trick? I was told Murray's oil is a good cleaner for wood flooring.

A. Do not use Murphy's. Use Bona wood floor cleaner. They even make a spray mop that is similar to a wet swiffer.

Powered by Yahoo! Answers

How much should i charge to install wood flooring ?

Q. As a handyman, how much do i charge per sq.ft to install oak wood flooring? They all need to be glued and there will be alot of cuts because the wood needs to curve in an s shape. There is 1000 sq.ft. I installed 1600 sq.ft before but did not charge my father in law. Thanks for your help.

A. For glue down wood flooring, 4 dollars a s.f. is about what you should be charging.

Can you place wood flooring on an uneven floor?

Q. there is a long hallway in my house I'd like to have wood flooring. but my contractor says that at the end of the hallway there is a slight incline. he says wood flooring would have to stop there and be replaced with carpet. esthetically I think it would look awful. is what he says true or is there another way to keep it all wood?

A. Hardwood floor installation can be slowed by an uneven subfloor. Before installing hardwood floors, use a straight edge to find the humps and dips in the subfloor. Then, using a floor leveling compound or asphalt shingles, shim the dips so the floor is level.

How many boxes would you have to buy of Laminate wood flooring to cover a 10x15 room?

Q. if it says it does 16sq ft per box?

I have a 1400sq ft home. and the math a did at 50 bucks a box, it would be well over 5k to do my home?

and at that price how does anyone afford to do wood flooring... even the fake kind? Am I figuring it wrong?

A. Are you doing one room or a whole house?? Your question suggests one room 10 X 15= 150 sq ft. You would divide that by the square footage listed on the box. In your example 16 sq ft= 9.37 or 10 boxes @ 50.00 = $500.00. To do the whole house could very well be $5000.00 for materials alone. Add to that the cost of the underlayment about $60.00 for a 100 sq ft roll. Are you sure you were looking at laminate and not engineered wood flooring? Laminate flooring cannot be refinished. Once it is scratched it's scratched! Engineered wood can be refinished once. I would suggest shopping around a bit more.

Powered by Yahoo! Answers

How to prep subfloor for wood flooring?

Q. I've installed prefinished wood flooring before but the kitchen has ceramic tile glued to 1/4" plywood, which is then (I assume) glued and nailed to the original sub floor. I need to remove the tile and 1/4" plywood so I can put our new wood flooring on the original subfloor. What is the best way to do this? I was planning on using a hammer and chisel but is there a specialized tool i can use?

A. Yes there is.. A hammer and wide chisel... In your case , and I ve removed 100s of floors over the years and that what you need to do. Hammer and chisel off the tile, using caution. Chips FLY!! Then you can use a crow bar to get under the wood and go at it.If your lucky it was screwed down and you can unscrew a lot of them. But most will pull through the 1/4" luan and then deal with that later.
Your lucky it was installed wrong this is an easier rip out, Suggestion. Safety glasses, long sleeve shirt sand ear protection to prevent chips in the ears ( I m not kidding) Cover doorways to help prevent dust and put a fan in a window to suck dust out.
Any questions you can e mail me through my avatar and check my qualifications GL

What type of cleaning technique should I use on bamboo wood flooring?

Q. I just recently bought a house and the house has bamboo laminate flooring what type of cleaner should I used to clean the floor. Will a steam mop do the trick? I was told Murray's oil is a good cleaner for wood flooring.

A. Do not use Murphy's. Use Bona wood floor cleaner. They even make a spray mop that is similar to a wet swiffer.

How do I remove asphalt tar sealant from wood flooring?

Q. We removed tile from the original wood flooring in our bedroom but they layed it down with asphalt tar sealant and it is stuck to the wood floor. We have bought a sealant stripper but it is coming off with difficulty. Any suggestions would be appreciated.

A. You'll be lucky to remove enough of it to save the floor beneath it. This is bad news. The commercial stripper is time-consuming, but it is the better option if you're even considering trying to rehab the wood floor.

If the wood floor is not that great of a concern, cosmetically speaking, you have at least one other option, but it is no less back-breaking or time-consuming than using chemical stripper - heat stripping. Use a heat gun to loosen the tar sealant and scrape off the wood with a steel putty knife or tile scraper. Try to scrape the loosened sealant in the direction of the wood grain as much as possible.

There are several risks involved with this method, the most significant being fire. Improper use of a heat gun can set fire to the sealant and/or the wood beneath it. The best way to guard against this is to work in small areas, scraping what is completely loose before moving on to another patch of floor. Never put the heat gun directly on the surface of the floor, no matter the surface covering. The other, less deadly, risk is the chipping, gouging and scratching the wood floor itself endures from the scrapers. Most light surface damage can be sanded out, but gouges are forever.

If you've already made the investment of time, energy and money to remove the tile from your wood floors, I'm guessing that you're up for the challenge of restoring your floors. I hope this alternative method helps and wish you good luck in pursuing the results you want for your home.

Powered by Yahoo! Answers

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

What wood flooring should I use for my table tennis room?

Q. What wood flooring should I use for my table tennis room? Some recommended floating interlocking laminate flooring with good underlays is good but I don't know what the hell are they talking about. I was wondering if some could suggest and explain some wood that can be used to play Table Tennis. To help Table Tennis requires good shock absorption and cushion from underlays. Those expert wood people out there please help.

A. Vinyl floor tiles are probably the best choice for your play room. These tiles are easy to install and are extremely durable

How to prep subfloor for wood flooring?

Q. I've installed prefinished wood flooring before but the kitchen has ceramic tile glued to 1/4" plywood, which is then (I assume) glued and nailed to the original sub floor. I need to remove the tile and 1/4" plywood so I can put our new wood flooring on the original subfloor. What is the best way to do this? I was planning on using a hammer and chisel but is there a specialized tool i can use?

A. Yes there is.. A hammer and wide chisel... In your case , and I ve removed 100s of floors over the years and that what you need to do. Hammer and chisel off the tile, using caution. Chips FLY!! Then you can use a crow bar to get under the wood and go at it.If your lucky it was screwed down and you can unscrew a lot of them. But most will pull through the 1/4" luan and then deal with that later.
Your lucky it was installed wrong this is an easier rip out, Suggestion. Safety glasses, long sleeve shirt sand ear protection to prevent chips in the ears ( I m not kidding) Cover doorways to help prevent dust and put a fan in a window to suck dust out.
Any questions you can e mail me through my avatar and check my qualifications GL

Powered by Yahoo! Answers

How do I replace wood flooring with tile in entrance way?

Q. In my entryway, we have wood flooring that has been warped do to water. My entryway also goes into my dining room using the same wood floowing flow. So, essentially I just want to take a small area (3x6) at the entryway to replace the wood flooring with tile. How would I go about this? Is it possible to cut the pre-existing wood flooring to make an area to lay the tile?

A. It is possible, as a matter of fact I've done it several times. Do you have an idea of the thickness of your wood floor - is it 3/4" or the 1/4" or 3/8" stuff. Knowing the thickness will help to determine what thickness of underlayment - tile backer board and/or your tile can be so your tile will not be thicker than your wood.

To cut the area out, I'd suggest you use masking tape and mark off where your lines to cut will be. The tape will make it easier to see the lines when you are cutting and it will also help to prevent splintering on the end grain cuts.

Once you have the area masked and SQUARED up. Emphasing squaring the area up - usually off the door. If your area isn't square then your tile won't look good. I'd suggest you take a hammer and chisel and remove some of the wood floor in the center of your area to determine the exact thickness of the wood. Once that is determined, take a circular saw with a plywood blade and set it for just a little shallower than that depth (to prevent cutting into the subfloor and weakening it). If the wood floor is oak, I'd suggest you take a utility knife and scribe along the lines you have and then using the saw cut just inside those scribed lines.

You must be careful not to cut beyond your lines - the area that can not be cut with the circular saw can then be cut with a sawzall or a sabre saw. The sawzall with a fine toothed blade is the best way to go. Again be very careful not to cut beyond your lines or cut through the subfloor.

Once the lines are cut, remove the wood and chisel and chips on the edges that the saws missed. Now, I'd suggest that you apply some polyeurathane to the newly cut edges to prevent any moisture from setting and grouting your tile from getting into the wood floor and staining or causing it to warp again.

Now that your area is cut out and the edges are sealed, You are ready to put down backer board and tile. I'd use hardi-backer, durrock, or a similar product - may only need 1/4" thick or could need 1/2" depending on the tile and thickness of your floor. Don't forget to allow for the thickness of thinset ( 1/4" usually) when deciding on tile and backer board thickness.

Set your tiles in the pattern you want and your entrance will look new again.

I hope that this helped answer your question.

What is the best machine to clean my wood floors?

Q. Almost all of my house is covered in wood flooring and there are about 8 people in the house. So you can imagine how hard it is to clean massive wood floors that get ALOT of traffic. I need some kind of machine to effectively clean my wood floors. I've been researching steamers and steamer vacuums, but I want to know which machine will work best. Also, my wood floors are surface sealed.

A. Use a damp mop with vinegar and water mixed 10 to 1. Why waste money on a machine that may ruin your floors? If there is any break in the finish on your floor, a steamer is forcing moisture into the wood. This will cause stains and possibly rot. You want as little moisture on your wood floors as possible.

Can laminate wood flooring in two adjoining rooms be mismatched?

Q. We are moving into our first home and we are replacing the carpet in the living room with laminate wood flooring. The floor in the dining room is already laminate wood and joins up with the living room floor. We are trying to pick out new floors and are wondering if we can get a different color wood floor for the living room or if we need to match it perfectly with the dining room. Would mismatching the wood look tacky?? Calling all interior designers! I need your help!

A. What you are asking is a question of personal taste. I (being a wood lover) think it's kinda cool to bounce to contrasting wood off one another, But thats just me.

Powered by Yahoo! Answers