Q. I am trying to replace a bathroom wall light fixture. My dilemma is the fixture I took out of the wall has a strip of light bulbs with 6 wires (3 white/3 black). The new fixture only has 2 wires (1 white/1 black). Which wires do I use? What do I do with the extra wires? Will the connection work without the ground?
A. Remove the extra white and black wires, they should be just jumpers connected to the main wires. Then it is white to white, black to black. The connection for a light will work without a ground, but it is safer and to code to use a ground. Usually there is a green or thin bare wire, from the fixture for the ground. It can be directly connected to the box the main wires come into.
do i paint my cabinets dark and walls light or the other way around?
Q. I want to paint my kitchen walls and cabinets but dont know if the walls should be a little darker than the cabinets or maybe the walls light and the cabinets dark. Also I have paneling I want to paint so do I paint it a different color than the walls and cabinets.
A. I'd paint the cabinets lighter and the walls a little darker shade. Nothing hardly makes a house look as old or as out of style as dark cabinets. Dark cabinets just scream 1970's and 1980's. The paneling color partly depends on where it is. You also may want to use some wood putty over the grooves in the wood paneling if it's the wide 1970's style paneling. If the panels are narrower (about 2" or so), I'd leave the grooves in place.
Don't worry about the room being too dark if you go with a slightly darker color for the walls. The walls don't have to be all that much darker than the cabinets. I'd go with a medium tone for the walls and a light tone for the cabinets.
Don't worry about the room being too dark if you go with a slightly darker color for the walls. The walls don't have to be all that much darker than the cabinets. I'd go with a medium tone for the walls and a light tone for the cabinets.
Why is my outside wall light going on and off?
Q. I have a mains powered wall light with a motion sensor. Since that very cold weather, when it senses motion and comes on, it flashes on and off, on and off...
Could something have been damaged by the severe cold?
Is there a part I can replace/fix, instead of replacing the whole light?
Thanks folks
Could something have been damaged by the severe cold?
Is there a part I can replace/fix, instead of replacing the whole light?
Thanks folks
A. My light suffered the same way. The sensor is a sealed unit so a new light is the only solution. I bought a new one and it looks better than the other one and works better.
My old one sometimes came on in bright sunlight and took ages to come on when dark.
My old one sometimes came on in bright sunlight and took ages to come on when dark.
Powered by Yahoo! Answers
No comments:
Post a Comment